Benefits and Drawbacks of Lithium-ion Batteries


High energy density offers the possibility of even greater capacity.

does not require a long time to prime when fresh. All that is required is a single standard charge.
comparatively low self-discharge; it is less than half that of batteries made of nickel.

Low Maintenance: There is no memory and no need for a periodic discharge.

Power tools and other applications can receive extremely high current from specialty cells.

Read More: 12v100ah lifepo4 battery


needs a protective circuit to keep the current and voltage within acceptable bounds.

Even while not in use, subject to aging; storage at 40% charge in a cool location lessens this impact.

Transportation limitations: larger-scale shipments could be governed by regulations. Batteries that are carried on personally are exempt from this prohibition.

costly to produce; it costs around 40% more than nickel-cadmium.

Not completely developed since metals and compounds are always changing.

The battery made of lithium polymers

The kind of electrolyte employed by the lithium-polymer sets it apart from traditional battery systems. The original idea is based on a dry solid polymer electrolyte and dates back to the 1970s. This electrolyte is similar to a plastic-like sheet that permits the interchange of ions, or electrically charged atoms or groups of atoms, but does not carry electricity. The conventional porous separator, which is soaked in electrolyte, is replaced with the polymer electrolyte.

The thin-profile geometry, ruggedness, safety, and manufacturing simplifications provided by the dry polymer design are noteworthy. With a cell thickness as little as one millimeter (0.039 inches), form, size, and shape are entirely up to the designers of the equipment.

Unfortunately, the conductivity of the dry lithium-polymer is low. The internal resistance is too high, making it unable to provide the current bursts required to spin up mobile computer equipment’s hard drives and power modern communication devices. The conductivity of the cell rises at temperatures of 60°C (140°F) and above; this temperature requirement makes the cell unsuitable for portable applications.

Some gelled electrolyte has been added as a compromise. The electrolyte membrane/separator used in commercial cells is made from the same conventional porous polypropylene or polyethylene separator that is filled with a polymer that gels when filled with liquid electrolyte. Therefore, the chemistry and materials of commercial lithium-ion polymer cells are quite similar to those of their counterparts with liquid electrolyte.

The adoption of lithium-ion polymer has not progressed as rapidly as some observers had predicted. Its reduced production costs and advantages over other systems have not been realized. In actuality, the capacity is marginally lower than that of a typical lithium-ion battery, meaning that no capacity benefits are realized. Credit card batteries and other wafer-thin geometries are among the areas where lithium-ion polymers find a commercial niche.


Extremely low profile: it is possible to have batteries with a profile similar to a credit card.

Manufacturers are not restricted by typical cell forms thanks to the flexible form factor. Any suitable size may be manufactured inexpensively with a big volume.

Lightweight: By doing away with the metal casing, gelled electrolytes allow for more straightforward packing.

Increased safety: reduced possibility of electrolyte leakage and more resistance to overcharging.


Diminished energy density and fewer cycles in comparison to lithium-ion batteries.

costly to produce.

No set sizes. The majority of cells are made for consumer markets with large volumes.

Greater energy-to-cost ratio compared to lithium-ion

Hi, I’m burncapital